FLAT PRODUCTS – ACC TO SECTIONS
HRP (Hot Rolled Pickelled)
Hot rolled coils of the HCL (hydrochloric acid) is already cleared. The sheets with a clean Surface that have been cleaned in the cleaning line can be oiled upon customers' requests. The materials according to customers' requirements are sold as rolls or cut lengths. The main function of the put cleaning lines, is the cold rolling is to produce our raw materials.
CRF (Colled Rolled Full Hard)
Up to 25 tons weight from 1.50mm to 4.50 mm in thickness was cleaned with acid, hot rolled coils of 0.25mm - 2.00 mm thickness is rolled to the products obtained are
CR (Colled rolled)
Annealed products, cold rolled out of a full hard temper line of sheet be tempered, hard structures has been addressed, then the temper roll the surface smoothness of the product are provided.
HDG (Hot Dipped Galvanized)
Up to 25 tons weight from 0.20mm to 2.0 mm in thickness
PPGI (Pre Paintted Galvanized)
0.20mm to 1.2 mm in thickness
Slitted Steel Strips
The slitting process can be performed to a minimum width of 20 mm. and an inner diameter of 200 mm. Vertical and horizontal packaging can be made according to the customer requirements.
Coils are cut-to-length. (Dimensions are specified by our customers). Sheet thickness range is 0,25-4,00 mm.
Diamond pattern – Teardrop Pattern. Material thickness is maximum 16.0 mm. Cut-to-length may be produced up to 15.000 mm. sheet widths are manufactured as 1000 mm from 1300 mm width, and 1550 mm both forms
Trapezoidal sheets are available in galvanized, painted or embossed forms. Trapezoidal sheets are manufactured in 27/200 form. Material thickness is maximum 1,20 mm. Cut-to-length may be produced up to 15.000 mm. Trapezoidal sheet widths are manufactured as 860 mm from 1000 mm width, and 1050 mm from 1220 mm width.
Corrugated sheets are available in galvanized, painted or embossed forms. Corrugated sheets are manufactured in 18/76,2 form. Material thickness is maximum 1,00 mm. Cut-to-length may be produced according to the customer requirements. Formed width is 875 mm. They may be manufactured from 800 mm to 914 mm width according to the requirements.
Sinusoidal sheets are manufactured in 9/31,8 form. Material thickness is maximum 0,40 mm. Cut-to-length may be produced in 1600-3000 mm range. Formed width is 834 mm, useful area width is 810 mm +25/-15mm. They may be produced from 762 mm to 914 mm width according to the requirements.
Structural / Support Profiles
It is the window support or non-welded structure profile form of galvanized products. After the requirements are carefully reviewed, products can be manufactured by making special patterns in necessary situations. Products may be manufactured in thousands of types.
This is the form in which galvanized or painted coils are processed through patterned rollers and their surface shapes are modified. Embossed coils can be recoiled or may be produced in cut, slitted, trapezoidal and corrugated forms. Material thickness is maximum 0,55mm.
This is the trapezoidal or sinusoidal formed type of product from galvanized or painted coils. Material thickness is between 0.30-1.20 mm. Bending angle is 145° as a standard. Ridge products may be manufactured between 300x300 and 500x500 mm.